|
Post by Peter DL7PJ on Mar 5, 2022 18:21:15 GMT
Thank you very much Mike, I downloaded and installed the file, I will test it tonight or tomorrow. 73 de Peter
|
|
|
Post by Peter DL7PJ on Mar 5, 2022 20:31:14 GMT
|
|
|
Post by Peter DL7PJ on Mar 5, 2022 20:35:44 GMT
after I closed JTDX, one process is still active and turns the transicver on and off very briefly. Attachments:jtdx_debug.txt (6.69 KB)
JTDX_trace.log (519.6 KB)
|
|
|
Post by w9mdb on Mar 5, 2022 21:18:24 GMT
Disable the Rig Power On/Off checkboxes in the Radio tab. See if that fixes this.
|
|
|
Post by Peter DL7PJ on Mar 6, 2022 15:40:50 GMT
Hello Mike, I switched it off as requested, small note: VFO B is only switched on after I select the RX frequency. 73 de Peter Attachments:jtdx_debug.txt (95.8 KB)
JTDX_trace.rar (204.99 KB)
|
|
|
Post by w9mdb on Mar 6, 2022 15:59:24 GMT
|
|
|
Post by Peter DL7PJ on Mar 7, 2022 4:49:58 GMT
Good morning Mike, yes I use the 64 bit version, RIG POWER ON does not work yet, VFO B is only switched on after I select the RX frequency. POWER OFF works, 73 de Peter Attachments:jtdx_debug.txt (253.55 KB)
JTDX_trace.rar (572.88 KB)
|
|
|
Post by Arvo ES1JA on Mar 7, 2022 6:43:49 GMT
VFO B is only switched on after I select the RX frequency
04:37:20.926 Transceiver start exit 1 reversed=0 resolution=0 38459 ms.
38 seconds gone for starting transceiver.
jtdx try's to set VFOB on (activate split) in this timestamp. 04:37:20.933 Timing #:3 do_tx_frequency 10135000
and at least hamlib answers to jtdx
04:37:21.624 poll split true 04:37:21.626 update other frequency 10135000.000000 that split and VFOB should be active.
If in rig seen something else, then it is still hamlib problem.
|
|
|
Post by w9mdb on Mar 7, 2022 14:20:59 GMT
I assume if you don't use the Power On option that it works OK?
|
|
|
Post by w9mdb on Mar 7, 2022 16:30:48 GMT
|
|
|
Post by Peter DL7PJ on Mar 7, 2022 17:47:32 GMT
Good evening Mike, the new HamLib DLL works perfectly. Transciver goes on and off and RIG SPLIT works very well. Thank you very much for the wonderful support. I'll send the logs again. And thanks again, this is Ham Spirit. 73 de Peter Attachments:jtdx_debug.txt (58.21 KB)
JTDX_trace.rar (167.04 KB)
|
|