|
Post by Arvo ES1JA on Mar 9, 2022 6:13:51 GMT
Not an opinion...an observation... Problem is this makes it impossible to use JTDX with any other software like FLDigi, DM780, CW Skimmer, MMTTY, and on and on. At least make it an option. One program at a time, when jtdx is running it will be the king. Other way, jtdx will kill itself when he sees side control of rig. In general any sharing of resources will cause anyway conflict sooner or later.
|
|
|
Post by w9mdb on Mar 9, 2022 13:46:07 GMT
Apparently you don't chase DXCC. Let me tell you my setup #1 JTDX #2 FLRig #3 Log4OM with cluster spotting #4 Antenna tuner program I wrote that talks to FLRig and the tuner #5 FLDigi #6 LOTWQSL (another program on my QRZ page) #7 PSTRotator #8 JTAlert So when Log4OM sees a new spot on CW you click on it and it puts the rig in CW mode and goes to that frequency in FLDigi
That no longer works. Please make this an option if you insist on having it.
|
|
|
Post by Arvo ES1JA on Mar 10, 2022 6:08:00 GMT
As I not done "following" mode in jtdx intentionally,I saw that restoring mode (when rig split not in use) is currently side effect of other problem.
|
|
|
Post by w9mdb on Mar 10, 2022 15:15:00 GMT
So that does mean we'll have a fix coming? Thanks
|
|
|
Post by Arvo ES1JA on Mar 11, 2022 6:27:27 GMT
Mike,I sent You a patch, is it resolved Your problem?
|
|
|
Post by w9mdb on Mar 11, 2022 13:09:46 GMT
Hey Arvo, Hmmm...don't see anything in my email.
|
|
|
Post by w9mdb on Mar 12, 2022 16:17:07 GMT
I'm using the TCI interface and it is constantly trying to set split mode even when split is turned off (or on) at the rig. I can try and capture the network traffic to see if it's JTDX or Thetis that's not behaving correctly. Could be Thetis is not sending the split status when it's disabled or enabled. Both status' though...if split is disabled and I turn split on in Thetis it gets turned off...and vice versa... You can probably duplicate this using the rig split key.
|
|