|
Post by Kevin- NC0P on Apr 20, 2022 14:18:05 GMT
Something changed recently and I can't figure out how to stop the double logging. One of the entries doesn't have all the info when it logs, the other entry has everything... Any help would be appreciated. Using HRD & JTDX/JTAlert
|
|
|
Post by w9mdb on Apr 20, 2022 14:34:18 GMT
On the Reporting tab do you have any of the "Send logged QSO ADFI data" boxes checked? Or "Enable sending logged QSO ADIF data" If so, turn them off. JTAlert does all the logging...and that's the full record you see. The entry with limited data is coming from JTDX.
|
|
|
Post by Kevin- NC0P on Apr 20, 2022 15:04:03 GMT
I had the Enable sending logged QSO ADIF data checked. Unchecked it. Neither of the boxes under "Send logged QSO ADIF data" were checked. I also have enable automatic logging checked. Does that sound correct?
|
|
|
Post by Kevin- NC0P on Apr 20, 2022 15:30:36 GMT
Well, I'm still messed up. I guess I'll just go thru setting up HRD again with the manual as well as JTDX. I've got something still wrong. Thanks W9MDB
|
|
|
Post by w9mdb on Apr 20, 2022 15:33:48 GMT
JTDX sounds like it's set up now. In JTAlert Last QSO API do you have that enabled too?
|
|
|
Post by Kevin- NC0P on Apr 20, 2022 18:07:13 GMT
Yes, I have that enabled as well. I made a couple of contacts, one didn't bring up any logged info. The other said something about it being logged, clicked ok. Went to my log and nothing is there. I don't have HRD V5/V6 logging enabled. Standard ADIF file logging is not enabled.
|
|
|
Post by w9mdb on Apr 20, 2022 18:20:04 GMT
You said you "do not" have HRD logging enabled? If that's true of course you won't get HRD logging. Turn on HRD logging.
|
|
|
Post by Kevin- NC0P on Apr 20, 2022 19:26:19 GMT
I'm getting logging now. It says after a contact that the station has been logged. I go to my logbook, the first entry is the station I just worked but with no date, mode, RST. The 2nd entry in logbook is the contact with all of the correct info. I'm back to where I was initially. I appreciate your help, but I think I need to go thru the setup of JTalert & HRD. I know it's something stupid, but...Thanks again for the try! Kevin
|
|