Post by ea5sw on Dec 26, 2022 13:48:48 GMT
I am working with JTDX via QO-100 satellite, my logbook is mainly LOG4OM.
The radio equipment is SDRConsole connected to a Pluto SDR in remote mode.
JTDX is capable of receiving the frequency at 10 GHz from SDRConsole, we lower it to 2.4 giving the offset value -8089.500 in the frequency separator, but when we send the QSO to LOG4OM, the satellite name, satellite mode and reception frequency they are not present in the ADI that is sent via UDP.
Is it possible to add a button for example SAT that adds these three fields when the contact is sent via UDP to the logging program?
SAT_NAME, SAT_MODE,PROP_MODE and BAND_RX
For example, it would be very easy for the contacts in the QO-100 where there are more and more hams working this mode.
Thanks in advance.
Jose - EA5SW
The radio equipment is SDRConsole connected to a Pluto SDR in remote mode.
JTDX is capable of receiving the frequency at 10 GHz from SDRConsole, we lower it to 2.4 giving the offset value -8089.500 in the frequency separator, but when we send the QSO to LOG4OM, the satellite name, satellite mode and reception frequency they are not present in the ADI that is sent via UDP.
Is it possible to add a button for example SAT that adds these three fields when the contact is sent via UDP to the logging program?
SAT_NAME, SAT_MODE,PROP_MODE and BAND_RX
For example, it would be very easy for the contacts in the QO-100 where there are more and more hams working this mode.
Thanks in advance.
Jose - EA5SW
