|
Post by f6exv on Dec 9, 2023 16:39:13 GMT
Hi all Maybe this is a stupid question, as I know less that nothing to these computer languages, UDPs, etc... I am paranoid about loosing logs, so I log to 2 different programs, namely Logger32 and Log4OM
It is possibe that JTDX sends the QSOs to both programs simultaneously ?
Thanks + 73 Paul F6EXV
|
|
|
Post by Wolfgang OE1MWW on Dec 10, 2023 8:15:15 GMT
In 'File' 'Reportig' you can set up in 'Send logged QSO ADIF data' to two destinations. Use 127.0.0.1 and differents ports for the two destinations. Do not forget to click on enable markers.
In Log4OM and in Logger32 you must use the IP but the different port number as set before.
|
|
|
Post by f6exv on Dec 10, 2023 8:49:04 GMT
Thanks for reply, but how do I set up 2 different ports there ? Must I use second UDP server ? Or must I separate 2 ports numbers separated by a comma ?
|
|
|
Post by Wolfgang OE1MWW on Dec 10, 2023 9:56:50 GMT
Thanks for reply, but how do I set up 2 different ports there ? Must I use second UDP server ? Or must I separate 2 ports numbers separated by a comma ? You did not tell us details about your setup - I guess - you are using an old JTDX You do not need to uninstall - just install .159 over the old version. That's OK.
You set in LOg4OM to forward to next program. Settings 'Connections' 'UDP Outbound' In JTDX .159, there is also a possibility to send the data to two destinations.
|
|
|
Post by f6exv on Dec 10, 2023 10:12:13 GMT
I am using that latest version. Should both L32 and Log4OM be set to the same port of 2333 (in your example) ?
|
|
|
Post by Wolfgang OE1MWW on Dec 10, 2023 10:14:42 GMT
I am using that latest version. Shopuld both L32 and Log4OM be set to the same port of 2333 (in your example) ? No, different ports, you are talking to two different destinations. See also my edited prev. message
|
|
|
Post by f6exv on Dec 10, 2023 10:19:46 GMT
How do I tell JTDX to send to 2 different ports, and where ? I have that 2nd UDP set as you showed (picture disappeared), do I use pirmary UDP for the other logging program ?
|
|
|
Post by f6exv on Dec 10, 2023 13:05:27 GMT
Here is what I have in JTDX.Is this correct ?
|
|
|
Post by Wolfgang OE1MWW on Dec 10, 2023 18:39:11 GMT
You set in LOg4OM to forward to next program. Settings 'Connections' 'UDP Outbound' Example: JTDX UDP port sends to Log4OM on port 2236
Log4OM 'Settings' 'Program Configuration' 'Connection' on the left side set up a UDP port to listen on 2236 Log4OM right side you forward this, for example to port 2237 In Logger32 you setup to listen on port 2237
JTDX => port 2236 => Log4OM => port 2237 => Logger32 IP is on all 127.0.0.1
|
|
|
Post by f6exv on Dec 10, 2023 19:28:31 GMT
Wolgang It still does not work... JTDX to Log4OM does work OK. But Log4Om does not send to L32, while outbound UDP in Log4OM is set to 2240, and UDP in L32 is also set to 2240. Whats service type should it be ? I have tried adif message, and callsign, but none will work.
|
|
|
Post by Wolfgang OE1MWW on Dec 11, 2023 8:00:40 GMT
you have email
|
|