|
|
Post by Richard WR7FT on Jan 16, 2024 18:47:49 GMT
Attached is a slide show (video is too large) of the audio changing on my IC-7300 during an FT8 Transmission. It starts out fine, then the audio drops out (ALC goes to 0 and Ip increases with lower RF power out) then picks up again. The Pwr slider is set to 0db, RF power is 13%, Volume set to 50. IC-7300 JTDX TX Issue slide show 3.mp4 (868.46 KB)Here is the link to the entire video. youtu.be/vOomqO0xcVc |
|
|
|
Post by w9mdb on Jan 16, 2024 21:53:00 GMT
Maybe a 13.8V power issue? Can you double-check the power line to the rig to ensure connections are good?
Rig showing 13.8V?
|
|
|
|
Post by Richard WR7FT on Jan 16, 2024 22:31:24 GMT
Thanks for the reply. The meter on the Power supply is showing a solid 13.8 volts. Also it seems to happen at all power levels. Interesting thing is that I've been using JTDX for about two years with the same rig and this started happening just recently with the same settings.
|
|
