|
|
Post by ac1dv on Feb 6, 2024 19:12:53 GMT
I just re installed the program. All is working great... except when I work a station and they send a 73 it shows but it is not crossed out. What did I miss in setup...  |
|
|
|
Post by Wolfgang OE1MWW on Feb 7, 2024 7:46:52 GMT
You did not tell us what opererating system you are using - guess it's Windows.
On the very first run, JTDX will create the JTDX.ini. This file holds all settings.
If you un-install, this file is not removed/deleted. If you re-install, the existing
JTDX.ini will be used again. All the settings are as before. Installation of JTDX
is more or less a simply copy process into the main installation directory.
Terminate JTDX, delete JTDX.ini and start JTDX again. Now you have to run through all
the settings again - and you will have a clean setup.
Remark: make screen shots, or write down the rig & audio settings, or whatever you
have set on special options.
|
|
|
|
Post by Arvo ES1JA on Feb 7, 2024 14:06:29 GMT
I just re installed the program. All is working great... except when I work a station and they send a 73 it shows but it is not crossed out. What did I miss in setup... Whatever You mean by “crossed out” but jtdx will show callsign as B4 only after QSO is logged. |
|
|
|
Post by ac1dv on Feb 7, 2024 20:47:23 GMT
I just re installed the program. All is working great... except when I work a station and they send a 73 it shows but it is not crossed out. What did I miss in setup... Whatever You mean by “crossed out” but jtdx will show callsign as B4 only after QSO is logged. after I make a contact. I send 73 the other stations replays with 73 and when THAT transmission from him shows on the computer is usually showed his call sign 73 with a black slash mark through the call. That is what the program had been doing. |
|
|
|
Post by Wolfgang OE1MWW on Feb 8, 2024 7:46:26 GMT
- as Arvo said: "...jtdx will show callsign as B4 only after QSO is logged."
So, the QSO must be logged ! The 73 send by other station is one step before.
- have a look in 'File' 'Settings' and select the 'Notifications' tab.
You can set a marker at 'Highlight worked ones' and 'strike it'
|
|
