Post by Tim VE3TJL on Feb 18, 2024 18:07:25 GMT
Hello and Sorry if this question is already buried in another thread. I searched many threads here last night and didn’t find the issue I’m having.
I’ve been fighting with this issue for about a year and can’t figure it out or find anything online so here it goes
I run a Yaesu ft-100 with xggcomms cable for cat and audio control through a raspberry pi running build a pi.
When I connect in both JTDX and WSJTX using ft-100 as radio and the proper settings, everything is good.
When I use flrig as my radio setting, everything works when configured for flrig in wsjt but in jtdx the transmit audio no longer works, whether transmit or tune.
Setting are identical between JTDX and WSJTX in every way
In JTDX If I click tune the PTT keys the radio but no audio is transmitted.
If i un-click then re-click tune within a second or 2 it will transmit audio but any longer of a pause than that between transmits and it will not transmit the audio making it impossible to complete a QSO
Changing polling intervals and tx delays changes nothing with the issue
Has anyone experienced this issue and resolved it? JTDX version is 2.2.159
On a side note, although PTT works from the main JTDX window using flrig, when in the radio setup window “Test CAT” works as it should but the “Test PTT” does nothing. Again only in JTDX and only on the flrig setup
Thanks for any advice offered.
I’ve been fighting with this issue for about a year and can’t figure it out or find anything online so here it goes
I run a Yaesu ft-100 with xggcomms cable for cat and audio control through a raspberry pi running build a pi.
When I connect in both JTDX and WSJTX using ft-100 as radio and the proper settings, everything is good.
When I use flrig as my radio setting, everything works when configured for flrig in wsjt but in jtdx the transmit audio no longer works, whether transmit or tune.
Setting are identical between JTDX and WSJTX in every way
In JTDX If I click tune the PTT keys the radio but no audio is transmitted.
If i un-click then re-click tune within a second or 2 it will transmit audio but any longer of a pause than that between transmits and it will not transmit the audio making it impossible to complete a QSO
Changing polling intervals and tx delays changes nothing with the issue
Has anyone experienced this issue and resolved it? JTDX version is 2.2.159
On a side note, although PTT works from the main JTDX window using flrig, when in the radio setup window “Test CAT” works as it should but the “Test PTT” does nothing. Again only in JTDX and only on the flrig setup
Thanks for any advice offered.
