|
|
Post by Gavin ZL3GAV on Mar 3, 2022 16:04:27 GMT
Hello
An observation after installation of v.2.2.159, 64 bit version, after restarting the program, the power slider bar resets to the minimum position intermittently.
Furthermore; at the apparent minimum position it is actually at FULL power, noted by high ALC readings!
Requires to be manually calibrated on most new sessions to reset correct audio TX level.
Also, the blue colour in the slider is intermittent, not always appearing.
(This original post has now been up for over a day, anyone else experiencing this “bug”?)
73
Gavin
ZL3GAV
|
|
|
|
Post by Igor UA3DJY on Mar 4, 2022 18:20:37 GMT
Hi Gavin,
We have had similar report for CAT control over Ham Radio Deluxe and PTT via VOX configuration, need in more details on your configuration, please.
73 Igor
|
|
|
|
Post by Gavin ZL3GAV on Mar 4, 2022 19:55:28 GMT
Hi Igor
Thanks, my configuration is running Ham Radio Deluxe v6.7.0.39, Silicon Labs CP2105 drivers etc USB, Yaesu FTDX-10, Windows 11 Pro.
It is intermittent, and not too much of an issue if I keep an eye on it. It was OK on the earlier version.
Very much enjoy using JTDX, with the amazing depth of decoding.
73
Gavin
ZL3GAV
|
|
|
|
Post by wa4mit on Mar 4, 2022 21:52:13 GMT
Seeing same here made post in Installation/Configuration section of forum. "With several of the latest version when software is first opened the power slider is at minimum but the actual power out is max. I did try the remember power setting for transmit but this did not change
the power slider setting at start up. This really present a problem if driving a amp before realizing this situation. This has not always been this way. This seems to start with 159.rc2 159.rc1 does not do this. I confirmed these results with actual versions.
Is there anything I can do to change this?"
Thanks 73 Morris WA4MIT
|
|
|
|
Post by Igor UA3DJY on Mar 6, 2022 10:43:54 GMT
Hi all,
Could you try to activate 'Monitor returns to last used frequency' option in General tab of Configuration settings, please, to check if it can be used as temporary workaround to this issue.
73 Igor
|
|
|
|
Post by Arvo ES1JA on Mar 6, 2022 16:15:58 GMT
Hopefully I was able to fix issue. At least here it is working when Monitor returns to last used frequency is disabled now.
|
|
|
|
Post by Gavin ZL3GAV on Mar 7, 2022 16:44:36 GMT
The “monitor returns to last used frequency” selection, has resolved the reported behaviour. Thanks.
|
|
|
|
Post by wa4mit on Mar 8, 2022 14:48:12 GMT
Checking the "monitor returns to last frequency" selection seems to fix the power slider behavior in fact it moves the power slider when the OK button is clicked after selection and returns to normal after program is restarted.
Thanks 73 Morris
WA4MIT
|
|
|
|
Post by Björn - PD5DJ on Mar 22, 2022 17:32:58 GMT
Thanks Arvo es1ja for pointing to this thread. At least there is a workarround for this issue. thanks :-) |
|
